- Descripción
Pinza giratoria DFQ
DFQ Turning Lifter is for lifting and turn steel plate. From a mechanics point of view, these clamps have ideal designs, which are compact, Ligero y fácil de usar.
The working load limited is applied in one piece, during lifting single could be in use for horizontal lifting and transport.
Característica:
- Carga de trabajo limitada (WLL): 1.5 - 10T
- Se utiliza para levantar horizontalmente y girar la placa de acero..
- La abrazadera está idealmente diseñada como su compacto, ligero, y fácil de usar.
Pinza giratoria DFQ——Especificación
Nº de pieza. | Modelo | WLL (montones) | Apertura de mandíbula (milímetro) | Peso (kg) |
LGLCDFQ1.5 | DFQ1.5 | 1.5 | 0-20 | 5 |
LGLCDFQ2.5 | DFQ2.5 | 2.5 | 0-30 | 9 |
LGLCDFQ5 | DFQ5 | 5.0 | 0-40 | 20 |
LGLCDFQ8 | DFQ8 | 8.0 | 0-50 | 26 |
LGLCDFQ10 | DFQ10 | 10.0 | 0-60 | 31 |
LGLCDFQ10 | DFQ10 | 10.0 | 50-100 | 40 |
General Safety Operation Instruction
- Las pinzas de elevación son adecuadas para levantar y transportar placas de acero con Max. dureza 37HrC(345 media pensión,1166 N/mm2).
- Las pinzas de elevación son aplicables en condiciones ambientales normales entre -40°C y +100°C.
- Overload the clamps are not allowed.
- During loading always using the whole jaw depth.
- Never lift more than one plate at same time.
- Always keep distance during raising or lowering the loads.
- Keep in mind that no one can be under the loads.
- Any welding to a clamp is forbidden which will negatively influence its hardness and strength.