PDB מהדק צלחת אופקי

תיאור

PDB מהדק צלחת אופקי

PDB Horizontal Plate Clamps are designed for lifting and transferring materials such as steel plates. They can be used in order to securely and safely transport plates both horizontally and vertically.

The WLL means the maximum load that the clamps are authorized to support when used in pairs with lift angle of 60°. In lifting operations, the clamps should be used in pairs or multiples.

תכונה:

עומס עבודה מוגבל (WLL): 0.8 - 10T
מתאים להרמה והובלה של לוחות פלדה במצב אופקי.
המהדק עשוי מפלדת פחמן איכותית.
אין התנגשות כאשר המהדק טעון.

PDB מהדק צלחת אופקי—-מפרט

חלק לא.	מודל	WLL (טונות)	פתיחת הלסת (מ"מ)	משקל (ק"ג)
LGLCPDB0.8	PDB0.8	0.8	0-25	2.5
LGLCPDB1	PDB1	1.0	0-30	3.5
LGLCPDB1.6	PDB1.6	1.6	0-30	4
LGLCPDB2	PDB2	2.0	0-40	5
LGLCPDB3.2	PDB3.2	3.2	0-45	6
LGLCPDB4	PDB4	4.0	0-50	6.5
LGLCPDB5	PDB5	5.0	0-55	7.5
LGLCPDB6	PDB6	6.0	0-65	10.5
LGLCPDB6b	PDB6(B)	6.0	0-130	22
LGLCPDB8	PDB8	8.0	0-100	22
LGLCPDB10	PDB10	10.0	0-125	33

△ General Safety Operation Instruction

● The lifting clamps are suitable for lifting and transportation of steel plates with Max. hardness 37HrC(345 HB,1166 N/mm2）.

● The lifting clamps are applicable in normal ambient condition between -40°C and +100°C.

● Overload the clamps are not allowed.

● During loading always using the whole jaw depth.

● Never lift more than one plate at same time.

● Always keep distance during raising or lowering the loads.

● Keep in mind that no one can be under the loads.

● Any welding to a clamp is forbidden which will negatively influence its hardness and strength.

PDB מהדק צלחת אופקי