- Descrizione
DFQ Turning Clamp
DFQ Turning Lifter is for lifting and turn steel plate. From a mechanics point of view, these clamps have ideal designs, which are compact, leggero e facile da usare.
The working load limited is applied in one piece, during lifting single could be in use for horizontal lifting and transport.
Caratteristica:
- Carico di lavoro limitato (WLL ·): 1.5 – 10T
- Used for horizontal lifting and turning the steel plate.
- The clamp is ideally designed as its compact, leggero, and easy to use.
DFQ Turning Clamp——Specificazione
Codice. | Modello | WLL · (Tonnellate) | Jaw Opening (millimetro) | Peso (Kg) |
LGLCDFQ1.5 | DFQ1.5 | 1.5 | 0-20 | 5 |
LGLCDFQ2.5 | DFQ2.5 | 2.5 | 0-30 | 9 |
LGLCDFQ5 | DFQ5 | 5.0 | 0-40 | 20 |
LGLCDFQ8 | DFQ8 | 8.0 | 0-50 | 26 |
LGLCDFQ10 | DFQ10 | 10.0 | 0-60 | 31 |
LGLCDFQ10 | DFQ10 | 10.0 | 50-100 | 40 |
General Safety Operation Instruction
- The lifting clamps are suitable for lifting and transportation of steel plates with Max. hardness 37HrC(345 HB,1166 N/mm2).
- The lifting clamps are applicable in normal ambient condition between -40°C and +100°C.
- Overload the clamps are not allowed.
- During loading always using the whole jaw depth.
- Never lift more than one plate at same time.
- Always keep distance during raising or lowering the loads.
- Keep in mind that no one can be under the loads.
- Any welding to a clamp is forbidden which will negatively influence its hardness and strength.