LA水平プレートクランプ

LA水平プレートクランプ

LA水平プレートクランプ manufactured from high quality carbon steel and suitable for lifting and transport of steel plates、construction and profiled bar in horizontal position.

The working load limit is the maximum load that the clamp are authorized to support when used in pairs with a lift angle of 60°. In lifting operations the clamps can be used in pairs or multiples.

特徴:

• 作業負荷制限 (ティッカー): 1 – 10T
• 鋼板の持ち上げと輸送に適しています, 水平位置にある構造バーとプロファイルバー.
• クランプは高品質の炭素鋼で作られています.
• クランプがロードされたときの衝突なし.

LA Horizontal Plate Clamp—–仕様

△ General Safety Operation Instruction

• The lifting clamps are suitable for lifting and transportation of steel plates with Max. hardness 37HrC(345 HB,1166 N/mm2）.
• The lifting clamps are applicable in normal ambient condition between -40°C and +100°C.
• Overload the clamps are not allowed.
• During loading always using the whole jaw depth.
• Never lift mo
  re than one plate at same time.
• Always keep distance during raising or lowering the loads.
• Keep in mind that no one can be under the loads.
• Any welding to a clamp is forbidden which will negatively influence its hardness and strength.