사용할 올바른 리프팅 체인 선택
The chain rigging should be selected precisely to suit the type, 운반 된 상품의 길이 및 체결 방법, 잘못된 선택으로 인해 체인 중단이 발생할 수 있습니다! So it is important to 사용할 올바른 리프팅 체인 선택. 리프팅 체인 리깅은 부유 된 물체의 평평하거나 매끄러운 표면 또는 범위 밖의 온도에는 적합하지 않습니다. 40 샨 투 + 400 중산 (위에 + 200 Shan rated loads will decrease).
There are a number of types of chains which can be used for lifting heavy loads and it is important to make sure you choose the right one. The two we are going to focus on in this post are the 등급 8 and grade 10 chains.
What are Chains Used For?
Both the grade 8 and grade 10 chains are used with overhead lifting cranes and lifting machines.
The grade eight chains range from 7mm to 32 밀리미터, while the grade 10 chains go from 10mm to 32mm.
. . 
.
G80 Chain -China LG G100 Chain -China LG
Understanding the Working Load Limit
It is important to know the weight of the load to be lifted, and then you must consider the type of sling system you are going to use. The working load limit measurement helps you to correctly ascertain which chain to use.
The working load limit of a chain should not just be equal to the weight of the load, it must also take into account any extra forces which may be imparted during the lifting. A suitably qualified person must correctly identify the right grade of chain to use according to the load to be lifted.
Using Chains in Sling Systems
These chains tend to be used as part of a sling system. That could be a single system, a four-leg lifting system, a two-leg system, or a three-leg wheelbarrow system.
Knowing the type of system you are going to use is very important when you are selecting the correct lifting chain as the angle at which the chains carry the load affect their working load limit.
These limits should not be exceeded under any circumstances.
Learn More
It is here you will find information on working load limits, and the correct chains to use for those loads. Of course, if you are still unsure, or require any further information, don’t hesitate to contact us.[email protected]
