Pengapit Plat Mendatar LA

Pengapit Plat Mendatar LA

Pengapit Plat Mendatar LA manufactured from high quality carbon steel and suitable for lifting and transport of steel plates、construction and profiled bar in horizontal position.

The working load limit is the maximum load that the clamp are authorized to support when used in pairs with a lift angle of 60°. In lifting operations the clamps can be used in pairs or multiples.

Ciri:

• Beban Kerja Terhad (WLL): 1 - 10T
• Sesuai untuk mengangkat dan mengangkut plat keluli, pembinaan dan bar berprofil dalam kedudukan mendatar.
• Pengapit diperbuat daripada keluli karbon berkualiti tinggi.
• Tiada perlanggaran apabila pengapit dimuatkan.

LA Horizontal Plate Clamp—–Spesifikasi

△ General Safety Operation Instruction

• The lifting clamps are suitable for lifting and transportation of steel plates with Max. hardness 37HrC(345 HB,1166 N/mm2）.
• The lifting clamps are applicable in normal ambient condition between -40°C and +100°C.
• Overload the clamps are not allowed.
• During loading always using the whole jaw depth.
• Never lift mo
  re than one plate at same time.
• Always keep distance during raising or lowering the loads.
• Keep in mind that no one can be under the loads.
• Any welding to a clamp is forbidden which will negatively influence its hardness and strength.