PDB Horizontal Plate Clamp

ဖော်ပြချက်

PDB Horizontal Plate Clamp

PDB Horizontal Plate Clamps are designed for lifting and transferring materials such as steel plates. They can be used in order to securely and safely transport plates both horizontally and vertically.

The WLL means the maximum load that the clamps are authorized to support when used in pairs with lift angle of 60°. In lifting operations, the clamps should be used in pairs or multiples.

ထူးခြားချက်:

အလုပ်ဝန်ကန့်သတ်ချက် (WLL): 0.8 – 10T
Suitable for lifting and transport of steel plates in horizontal position.
ကုပ်ကို အရည်အသွေးမြင့် ကာဗွန်သံမဏိဖြင့် ပြုလုပ်ထားသည်။.
ကုပ်ကိုဆွဲချသည့်အခါ တိုက်မိခြင်းမရှိပါ။.

PDB Horizontal Plate Clamp—-သတ်မှတ်ချက်

အပိုင်းအမှတ်.	မော်ဒယ်	WLL (တန်)	Jaw Opening (မီလီမီတာ)	အလေးချိန် (ကီလိုဂရမ်)
LGLCPDB0.8	PDB0.8	0.8	0-25	2.5
LGLCPDB1	PDB1	1.0	0-30	3.5
LGLCPDB1.6	PDB1.6	1.6	0-30	4
LGLCPDB2	PDB2	2.0	0-40	5
LGLCPDB3.2	PDB3.2	3.2	0-45	6
LGLCPDB4	PDB4	4.0	0-50	6.5
LGLCPDB5	PDB5	5.0	0-55	7.5
LGLCPDB6	PDB6	6.0	0-65	10.5
LGLCPDB6b	PDB6(ခ)	6.0	0-130	22
LGLCPDB8	PDB8	8.0	0-100	22
LGLCPDB10	PDB10	10.0	0-125	33

△ General Safety Operation Instruction

● The lifting clamps are suitable for lifting and transportation of steel plates with Max. hardness 37HrC(345 HB,1166 N/mm2）.

● The lifting clamps are applicable in normal ambient condition between -40°C and +100°C.

● Overload the clamps are not allowed.

● During loading always using the whole jaw depth.

● Never lift more than one plate at same time.

● Always keep distance during raising or lowering the loads.

● Keep in mind that no one can be under the loads.

● Any welding to a clamp is forbidden which will negatively influence its hardness and strength.

PDB Horizontal Plate Clamp