- Opis
THC Pipe Hook
THC Pipe Hooks (nazywany również Lifting Pipe Hook） used in pairs for lifting horizontal pipes or tubes made of various materials. These Pipe Hooks simply fit into the ends of pipes allowing them to be lifted via a conventional two-leg sling.
Cecha:
- Working Load Limited (WLL): 0.5-2T
- Used for lifting steel pipes or something like that.
- When mounted onto the pipe. This hook will not fall off when the operator releases his hand from the hook.
- The hooks are made of special steel, which are precisely tempered for extra strength and durability.
THC PIPE HOOK——-Specyfikacja
| Nr części. | Model | WLL (Ton) | Jaw Opening (Mm) | Ciężar (Kg) |
| LGLCTHC0.5 | THC0.5 | 0.5 | 16 | 0.5 |
| LGLCTHC1 | THC1 | 1.0 | 19 | 1 |
| LGLCTHC2 | THC2 | 2.0 | 24 | 2.1 |
Aplikacja
Powiązane produkty
QT Drum Clamp
- Working Load Limited (WLL): 0.2T
- It can be used in single or in pairs.
- The automatic lock mechanism keeps it safe and reliable.
- No collision when the clamp is loaded.
LA Horizontal Plate Clamps
- Working Load Limited (WLL): 1 – 10T
- Suitable for lifting and transport of steel plates, construction and profiled bars in horizontal position.
- The clamp is made of high quality carbon steel.
- No collision when the clamp is loaded.
LC Horizontal Plate Clamps
Working Load Limited (WLL): 1 – 3T
Suitable for lifting and transport of steel plates, construction and profiled bars in horizontal position.
The clamp is made of high quality carbon steel.
DFM Overturn Clamp
- Working Load Limited (WLL): 1 – 5T
- Used for horizontal lifting and turning of steel plates and profiled bars.
- The clamp is ideally designed as its compact, lightweight, and easy to use.
QS Series Double Steel Plate Lifting Clamps
- Working Load Limited (WLL): 1 – 7T
- The clamp is made of high quality carbon steel.
- No collision when the clamp is loaded.
- The sharp hook point is effective when inserting into small interval.
DFQ Turning Clamp
- Working Load Limited (WLL): 1.5 – 10T
- Used for horizontal lifting and turning the steel plate.
- The clamp is ideally designed as its compact, lightweight, and easy to use.
CDK Vertical Plate Clamp
- Limit obciążenia roboczego (WLL): 0.8 – 5T
- Used for lifting thick steel plate.
- Clamp with articulated lifting shackle.
- The clamp is fitted with locking device to avoid any slip.
- The clamp is made of high quality carbon steel.
Horizontal Plated Clamp Model HPC
- Working Load Limited (WLL): 1.5 – 5T
- Used for horizontal lifting of steel plates.
- The clamp is made of high quality carbon steel.
- No collision when the clamp is loaded.
CDH Vertical Plate Clamp
- Working Load Limited (WLL): 0.8 – 16T
- Standard design clamp for vertical lifting of steel plates and steel structures.
- The clamp is fitted with spring-loaded tightening locking device to avoid any slip.
- The clamp will be locked no matter the jaw is closed or open.
PDQ Single Steel Plate Lifting Clamps
- Working Load Limited (WLL): 1 – 10T
- Suitable for lifting single or multi pieces of steel plates.
- The clamp is made of high quality carbon steel.
- This clamp must be used with beam, and no collision when the clamp is loaded.
- Automatic unloading.
SCDH Vertical Plate Clamp
- Working Load Limited (WLL): 1 – 5T
- Standard design clamp for vertical lifting of steel plates and steel structures.
- The clamp is fitted with spring-loaded tightening locking device to avoid any slip.
PDK Multi Plate Clamp
- Working Load Limited (WLL): 3 – 15T
- Used for lifting multi pieces of steel plates.
- The clamp is made of high quality carbon steel.
- No collision when the clamp is loaded.
