DFQ Turning Clamp

  • Description

 DFQ Turning Clamp



DFQ Turning Lifter is for lifting and turn steel plate. From a mechanics point of view, these clamps have ideal designs, which are compact, lightweight and easy to use.

The working load limited is applied in one piece, during lifting single could be in use for horizontal lifting and transport.




  • Working Load Limited (WLL): 1.5 – 10T
  • Used for horizontal lifting and turning the steel plate.
  • The clamp is ideally designed as its compact, lightweight, and easy to use.



DFQ Turning Clamp——Specification

Part No.ModelWLL
Jaw Opening



 General Safety Operation Instruction

  •  The lifting clamps are suitable for lifting and transportation of steel plates with Max. hardness 37HrC(345 HB,1166 N/mm2).
  • The lifting clamps are applicable in normal ambient condition between -40°C and +100°C.
  • Overload the clamps are not allowed.
  • During loading always using the whole jaw depth.
  • Never lift more than one plate at same time.
  • Always keep distance during raising or lowering the loads.
  • Keep in mind that no one can be under the loads.
  • Any welding to a clamp is forbidden which will negatively influence its hardness and strength.