LA Horizontal Plate Clamps

  • Description

LA Horizontal Plate Clamps



LA Horizontal Plate Clamps manufactured from high quality carbon steel and suitable for lifting and transport of steel plates、construction and profiled bar in horizontal position.

The working load limit is the maximum load that the clamp are authorized to support when used in pairs with a lift angle of 60°. In lifting operations the clamps can be used in pairs or multiples.




  • Working Load Limited (WLL): 1 – 10T
  • Suitable for lifting and transport of steel plates, construction and profiled bars in horizontal position.
  • The clamp is made of high quality carbon steel.
  • No collision when the clamp is loaded.

LA Horizontal Plate Clamp—–Specification

Part No.ModelWLL
Jaw Opening

△ General Safety Operation Instruction

  • The lifting clamps are suitable for lifting and transportation of steel plates with Max. hardness 37HrC(345 HB,1166 N/mm2).
  • The lifting clamps are applicable in normal ambient condition between -40°C and +100°C.
  • Overload the clamps are not allowed.
  • During loading always using the whole jaw depth.
  • Never lift mo
    re than one plate at same time.
  • Always keep distance during raising or lowering the loads.
  • Keep in mind that no one can be under the loads.
  • Any welding to a clamp is forbidden which will negatively influence its hardness and strength.