PDQ Single Steel Plate Lifting Clamps

PDQ Single Steel Plate Lifting Clamps

PDQ Single Steel Plate Lifting Clamps are used for horizontal lifting of single or multi- steel plates.Aceste Horizontal lifting Clamps are designed as roller at the top to avoid any damage on the wire rope.

The WLL means the maximum load that the clamps are authorized to support when used at lift angle of 60°. In lifting operations, the clamps should be used in 2 pairs.

Caracteristică:

• Sarcina de lucru limitata (WLL): 1 - 10T
• Suitable for lifting single or multi pieces of steel plates.
• Clema este realizată din oțel carbon de înaltă calitate.
• This clamp must be used with beam, and no collision when the clamp is loaded.
• Automatic unloading.

PDQ Single Steel Plate Lifting Clamp——Specificație

Aplicație

Rated load caused by 2 tests is regarded as the standard,and four complementary use during the hoist.

It must be used with the balance beam. During the hoist，hung articles are forbidden collision.

Unhook automatically

Don’t overload to use.